Bard Bayrd Furnace 403293A User Manual
Important, Affix this packet adjacent to the furnace
Advertising
Table of contents
Document Outline
- in
- - TO THE INSTALLER -
- - TO THE OWNER -
- PARTS
- INSTALLERS' MANUAL
- SECTION 2 — IMPORTANT SAFETY RULES*
- SECTION 3 — MEETING CODES.
- SECTION 4 — DETERMINING BEST FURNACE LOCATION.
- SECTION 5 — IDENTIFYING FURNACE DIMENSIONS, SPECIFICATIONS, AND POSITION.
- SECTION 6 — ALLOWING FOR CLEARANCES.
- SECTION 7 — SUSPENDING FURNACE.
- SICTION S PROVIDING FOR COMBUSTION AND ViNTILATION AIR.
- 100,000
- 2,000
- b.
- overall area of openings with wood louvers installed
- C. Installing furnace in unconfIned space.
- D. Allowing for exhauet fan operation.
- SICTION 9 — PROVIDING P
- MCriON 10 —
- TOOLS NIIDID rOR INSTALLATION.
- SICTION 11 — INSTALLING GAS PIPING.
- SICTION 12 —
- INSTALLING ILICTRICAL WIRING.
- fICTION 13 —
- FOLLOWING FIELD WIRING DIAGRAM
- SECTION 14 — ADJUSTING ROOM THERMOSTAT HEAT ANTICIPATOR
- SECTION 1 5 — SEQUENCE OF OPERATION.
- SECTION 16 — INSTALLING DUCT WORK,
- SECTION 17 — SELECTING AND INSTALLING FILTER CABINETS.
- SECTION 18 CHECKS BEFORE STARTING FURNACE.
- SECTION 18 ^ ADJUSTING PILOT.
- SICTION 20 — ADJUSTING MANIFOLD PRiSSURI.
- SECTION 21 — CHECKING GAS INPUT.
- sicTiON aa — orifici sizi.
- SICTION as — DERATINO FOR HIGH AiTirUDES.
- SECTION 24 — ADJUSTING BLOWER SPEED..
- SECTION 25 — MEASURING DUCT WORK STATIC PRESSURE.
- SECTION 26 — MEASURING AIR TEMPERATURE RISE.
- SICTIOM 27 » CHICKING CONTROLS.
- SRCTION 20 BLOWER TIMINGS.
- SECTION ao — MAINTAINING FURNACE IN GOOD WORKING ORDER.
- WARNINOx Follow these procedures before Inspecting furnace.
- • Turn room thermostat to its lowest or off setting.
- * Turn off manual gas shut-off valve.
- * Wait at least five minutes for furnace to cool If It was recently operating.
- • Turn off furnace electrical power; failure to do so could result In injury or death.
- SECTION 30 — GETTING OTHER INFORMATION AND PUBLICATIONS.
- American Gas Association
- SIDEWALL VENTING
- INSTALLERS' MANUAL