Tape operations – Aiwa CA-DW635 User Manual
Page 10
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
TAPE PLAYBACK
TAPE OPERATIONS
► -4^
m/± II
• Use Type I (normal) tapes only.
• Tapes are played back on one side only.
1
Press TAPE and press m/± STOP/EJECT to
open the cassette holder.
The side to be played-------- \
m
Deck
1
n—iR~~'
3
:^ I Deck
2
;------------------
® m / ±
Insert a tape with the exposed side down and the side to
be piayed facing out.
Push the cassette holder to close.
2
Press ► PLAY to start play.
To stop play, press ■/£ STOP/EJECT.
To pause play, press II PAUSE. To resume play, press
again.
To fast forward or rewind, press ►► FF or ◄◄ REW in
stop mode. Then press M/± to stop the tape.
To start play when the power is off (Direct Play Function)
Press ► PLAY. The power is turned on and play of the
inserted tape begins.
After play on deck 2 finishes, piay on deck 1 will start without
interruption.
During play on deck 2, press II PAUSE then press ► PLAY
on deck 1.
II PAUSE on deck 1 will be released at the end of play on
deck 2.
About cassette tapes
• To prevent accidental erasure, break off the plastic
tabs on the cassette tape with a screwdriver or other
pointed tool after recording.
Tab for side A
To record on the tape again, cover the tab openings
with adhesive tape, etc.
• 120-minute or longer tapes are extremeiy thin and
easily deformed or damaged. They are not
recommended.
• Take up any slack in the tape with a pencii or similar
tool before use. Slack tape may break or jam in the
mechanism.
1 0
ENGLISH