Aiwa CA-DW635 - Manual (Page 8)

CD PLAYING
CD OPERATIONS
7
Press CD, then press ± OPEN/CLOSE to open
the disc compartment. Load a disc with the
label side up and close the disc compartment.
Total number of tracks
2 Press ►.
Play begins with the first track.
Elapsed playing time
VOL
I I I l _
U . L _ (
To check the remaining time
Press DISPLAY on the remote control during play. The
amount of time remaining until all tracks finish playing is
displayed. To restore the play time display, press the button
again.
Selecting a track with the remote control
Press the numberd buttons 0-9, - h IO to select a track.
Example:
To select the 25th track, press +10,-1-10 and 5.
To select the 10th track, press +10 and 0.
The selected track starts to play and play continues to the
end of that disc.
NOTE
Do not use irregular shaped CDs (example: heart-shaped,
octagonal ones).
It may result in malfunctions.
When loading an 8-cm (3-inch) disc, put it onto the inner
circle of the tray.
Do not place more than one compact disc on the disc tray.
Track number being played
To stop play, press ■.
To pause play, press II. To resume play, press again.
To search for a particular point during playback, keep
-4-4 or ►►- pressed and release the button at the desired
point.
To skip to the beginning of a track during playback,
press or ►► repeatedly.
To remove discs, press A OPEN/CLOSE.
To start play when the power is off (Direct Play Function)
Press the ► button. The power is turned on and play of the
loaded disc begins.
If a function other than CD play is selected with the power
on, one press of ► selects the CD function and starts play.
8 ENGLISH