Aiwa CA-DW635 - Manual (Page 14)

SETTING THE TIMER
1
2,3
The unit can be turned on at a specified time every day with
the built-in timer.
Set the timer as follows while the power is on.
Preparation
Make sure the clock is set correctly.
To check the specified time
Press TIMER. The timer-on time and the duration for the
timer-activated period flash for 4 seconds.
To cancei timer standby mode temporariiy
Press TIMER twice to turn off ©.
Using the unit while the timer is set
You can use the unit normally after setting the timer.
Before turning off the power, repeat step 4 to prepare the
source, and adjust the volume.
NOTE
• Timer playback will not begin unless the power is turned
off.
• Connected equipment cannot be turned on and off by the
built-in timer of this unit. Use an external timer.
7
Press TIMER to display 0
, and press II SET
within 4 seconds.
© and the hour flash.
.............. ......... ........... .....................
/_/ A ' / ’ / -ifn n
■ i i I —i.i 11 '
I I " / . C/ /_!
If you do not press II SET within 4 seconds, another
operation may start.
Designate the hour of the timer-on time by
pressing ◄◄ or and
II SET. Repeat to
designate the minute of the timer-on time.
Select the duration for the timer-activated
period with ◄◄ or and press II SET.
©
VOL O f
. . . c n,..,
Afu
The duration for the timer-activated period can be set
between 5 and 240 minutes in 5-minute steps.
4
Prepare the source.
To listen to a CD, press CD and load the disc.
To listen to the radio, press TUNER/BAND and tune to
a station.
5
Press POWER to turn the unit off after adjusting
the volume.
© remains on the display after the power is turned off
(timer standby mode).
©
O i^'i
/ // /
I ____ I I I
U . _ f
u
When the timer-on time is reached, the unit turns on and
begins play with the selected source.
The volume level is automatically set to 21 when the
power is turned off with the volume level set to 22 or
more.
1 4
ENGLISH