Aiwa NSX-A909 - Manual (Page 14)

TAPE PLAYBACK
PLAYING BACK A TAPE
INSERTING TAPES
■REJECT
■ Deck 2
• On deck 1, tapes are always played back on both sides.
On deck 2, you can select a reverse mode to play back one or
both sides.
• Use Type I (normal), Type II (high/CrOa) or Type IV (metal)
tapes for playback.
Press TAPE and press ± EJECT to open the
cassette holder.
Insert a tape with the exposed side down. Push the cassette
holder to close.
To select a reverse mode (deck 2 only)
Each time REV MODE is pressed, the reverse mode changes.
f ' F 2
To play one side only, select !I.
To play from front side to reverse side once only, select Z).
To play both sides repeatedly, select <X>.
• When tapes are loaded in both decks, on the display
indicates Continuous Play.
Insert a tape.
1 Press DOLBY NR and turn Dolby NR on or off to
match the playback tape.
□□ NR
I
T F l 0000
For tapes recorded with DOLBY NR, turn on □□ NR.
For tapes recorded without DOLBY NR, turn off □□ NR.
2 Press ◄►to start play.
Playing deck number
T F l 0000
Playback side indicator The tape counter indicates the
tape running length.
► : The front side is being played (forward).
◄ : The back side is being played (reverse).
'
When tapes are loaded in both decks
Press TAPE first to select a deck.
The selected deck number is displayed.
To stop play, press ■.
To pause play (deck 2 only), press II. To resume play, press
again.
To change the playback side, press DIRECTION/PRESET
in play or pause mode.
To fast forward or rewind, press ◄◄ or ►►. Then press ■ to
stop the tape.
To start play when the power is off (Direct Play Function)
Press TAPE. The power is turned on and play of the inserted
tape begins.
To set the tape counter to 0000
Press ■ CLEAR in stop mode.
The counter is also set to 0000 when the cassette holder is
opened and closed.
13
ENGLISH