Aiwa NSX-A909 - Manual (Page 28)

Speaker system SX-WNA909
Main unit CX-NA909
FM tuner section
Tuning range
Usable sensivity (IHF)
Antenna terminals
AM tuner section
Tuning range
Usable sensitivity
Antenna
Amplifier section
Mid-high frequency amplifier
Power output
Totai harmonic distortion
Low frequency amplifier
Power output
Total harmonic distortion
Inputs
Outputs
Cassette deck section
Track format
Frequency response
Signal-to-noise ratio
Recording system
Heads
87.5 MHz to 108 MHz
13.2 dBf
75 ohms (unbalanced)
530 kHz to 1710 kHz (10 kHz step)
531 kHz to 1602 kHz (9 kHz step)
350 pV/m
Loop antenna
30 W + 30 W (200 Hz - 20 kHz,
THD less than 1%, 6 ohms)
0.1 % (17 W, 1 kHz, 6 ohms, DIN
AUDIO)
80 W + 80 W (20 Hz - 200 Hz, THD
less than 1%, 6 ohms)
0.1 % (70 W, 70 Hz, 6 ohms, DIN
AUDIO)
VIDEO/AUX: 210 mV (adjustable)
MD: 210 mV (adjustable)
MIC 1, MIC 2: 1.4 mV (10 kohms)
LINE OUT: 280 mV
SPEAKERS: accept speakers of 6
ohms or more
SURROUND SPEAKERS:
accept speakers of 8 ohms to 16
ohms
PHONES (stereo jack): accepts
headphones of 32 ohms or more
4 tracks, 2 channels stereo
Cr02 tape: 50 Hz - 16000 Hz
Normal tape: 50 Hz - 15000 Hz
60 dB (Dolby B NR ON, CrOz tape
peak level)
AC bias
Deck 1: Playback head x 1
Deck 2:Recording/playback head
X 1, erase head x 1
Compact disc player section
Laser
D-A converter
Signal-to-noise ratio
Harmonic distortion
Wow and flutter
General
Power requirements
Power consumption
Dimensions of main unit
(W X H X D)
Weight of main unit
Semiconductor laser (X = 780 nm)
1 bit dual
85 dB (1 kHz, 0 dB)
0.05 % (1 kHz, 0 dB)
Unmeasurable
120 VAC, 60 Hz
140 W
260 X 329 X 369 mm
(10V4X 13x UVein.)
9.8 kg (21 IbslOoz.)
Cabinet type
Speakers
Impedance
Output sound pressure level
Dimensions (W x H x D)
Weight
4 way, subwoofer (magnetic
shielded type)
Subwoofer:
200 mm (7 Vs in.) cone type
Woofer:
120 mm (4 % in.) cone type
Tweeter:
60 (2 % in.) mm ceramic type
Super tweeter:
20 mm ('Vi6 in.) ceramic type
6 ohms/6 ohms
87 dB/W/m
240
X
324
X
330 mm
(9 Va X 12 Vs X 13 in.)
6 kg (13 lbs 4 oz.)
Specifications and external appearance are subject to change without
notice.
uuu SYSTEM
The word “BBE” and the “BBE symbol” are trademarks of BBE
Sound, Inc.
Under license from BBE Sound, Inc.
DOLBY NR
Dolby noise reduction manufactured under license from Dolby
Laboratories Licensing Corporation.
“DOLBY” and the double-D symbol □□ are trademarks of Dolby
Laboratories Licensing Corporation.
COPYRIGHT
Please check the laws on copyright relating to recordings from
discs, radio or external tape for the country in which the machine
is being used.
NOTE
This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to Part 15 of the FCC
Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation.
This equipment generates, uses, and can radiate radio frequency
energy and, if not installed and used in accordance with the
Instructions, may cause harmful interference to radio
communications. However, there is no guarantee that
interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment
off and on, the user is encouraged to try to correct the interference
by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on circuit different from
that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician
for help.
CAUTION
Modifications or adjustments to this product, which are not
expressly approved by the manufacturer, may void the user’s
right or authority to operate this product.
27
ENGLISH