Aiwa NSX-A909 - Manual (Page 19)

o
5
2
a
DC
o
u
u
EC
• Set the tape to the point where recording will start.
• The reverse mode is automatically set to Z.
Note that recording will be done on one side of the tape only.
1 Press TAPE.
2 Insert the original tape into deck 1 and the tape
to be recorded on into deck 2.
Insert the tapes with the sides to be played back or recorded
on fcicing out from the unit.
3 Press DOLBY NR to turn off the Doiby NR.
□□ NR on the display goes out.
4 Press TAPE DECK 1/2 to seiect deck 1.
“TP r is displayed.
5 Press • REC/REC MUTE to start recording.
Playing and recording start simultaneously.
To stop dubbing
Press II.
To set the Dolby NR when playing back the dubbed tape
Press DOLBY NR and turn Dolby NR on or off to match the
original tape.
This function allows you to make exact copies of both sides of
the original tape. The reverse side of both tapes will start
simultaneously as soon as the longer tape has been reversed.
• Dubbing does not start from a point halfway in the tape.
• The reverse mode is automatically set to TD.
• The Dolby NR does not affect recording.
1 Press TAPE.
2 Insert the original tape into deck 1 and the tape
to be recorded on into deck 2.
Insert each tape with the side to be played back or recorded
on facing out from the unit.
3 Press SYNC DUB once or twice to start recording.
© For recording at normal speed, press it once to display
NORM-DUB.
@ For recording at high speed, press it twice to display
HIGH-DUB.
©
NORM.DUB HIGH..DUB
The tapes are rewound to the beginning of the front sides,
and recording starts.
To stop dubbing
Press ■.
To set the Dolby NR when playing back the dubbed tape
Press DOLBY NR and turn Dolby NR on or off to match the
original tape.
Recording does not start, if the erasure prevention tab on either
side of the tape is broken off.
ENGLISH
18