Random /repeat play, 4 repeat steps 2 and 3 to program other tracks, 5 press ◄►to start play – Aiwa NSX-A909 User Manual
Page 17: 1 press prgm twice in stop mode, 2i v p.0 i
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
RANDOM /REPEAT PLAY
Use the remote control.
RANDOM play
All the tracks on the selected disc or all the discs can be played
randomly.
REPEEAT play
A single disc or all the discs can be played repeatedly.
Press RANDOM/REPEAT.
Each time it is pressed, the function can be selected cyclically.
RANDOM play — RANDOM lights up on the display.
REPEAT play — C^. lights up on the display.
RANDOM/REPEAT play— RANDOM and c^. light up on the
display.
Cancel — RANDOM and disappear from the display.
To play all discs, press ► to start play.
To play a single disc, press one of DISC DIRECT PLAY 1-3 to
start play.
During random play it is not possible to skip to the previously
played track with
3 Press numbered buttons 0-9 and +10 to program
a track.
Example:
To select the 25th track, press +10, +10 and 5.
To select the 10th track, press +10 and 0.
Total number of
Selected track number
selected tracks
2I V P.0 i
.................. I................
Program number
IP 4;-35
Total playing time of
the selected tracks
4 Repeat steps 2 and 3 to program other tracks.
5 Press ◄►to start play.
To check the program
Each time ◄◄ or ►► is pressed in stop mode, a disc number,
track number, and program number will be displayed.
To clear the program
Press ■ CLEAR in stop mode.
To add tracks to the program
Repeat steps 2 and 3 in stop mode. The track will be programmed
after the last track.
(3
z
►
<
&
a
o
Up to 30 tracks can be programmed from any of the inserted
discs.
1
2,3
To change the programmed tracks
Clear the program and repeat all the steps again.
To play the programmed tracks repeatedly
After programming the tracks, press RANDOM/REPEAT
repeatedly until c;;. appears on the display.
During programmed play, you cannot perform random play,
checking the remaining time, and selecting a disc or track.
Use the remote control.
1 Press PRGM twice in stop mode.
“PRGM” is displayed .
........ 0;; 00
• When the PRGM is pressed once in step 1, the unit enters
the KARAOKE PROGRAM (page 22).
2 Press DISC DIRECT PLAY, then press numbered
buttons 1-3 within 3 seconds to select a disc.
Go to the next step when the tray stops rotating.
ENGLISH
16