Tune – Aiwa Z-L31 User Manual

Page 10

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

RADIO RECEPTION

■MONO

TUNER

■BAND

■SHIFT

To search for a station quickly (Auto Search)

Press

TUNER PRESET repeatedly to display “SEARCH” (auto

search

mode),

and

turn

MULTI

JOG

clockwise

or

counterclockwise until the frequency starts to change rapidly.
After tuning in to a station, the search stops.

SEARCH

FN 9 3 = = 0 y

To Stop the Auto Search manually, turn

MULTI JOG a little in

either direction.
• The Auto Search may not stop at the stations with very weak

signals.

• ◄◄ DOWN and ►►UP are also available to search for a

station. Keep

◄◄DOWN or ►►UP pressed until the tuner

starts searching. Press the button to stop the search manually.

1 PressTUNER/BAND to select the FM or AM band.

When

TUNER/BAND is pressed while the power is off, the

power is turned on directly (Direct Play Function).

To select a band with the remote control

Press

BAND while pressing SHIFT.

2 Press TUNER PRESET repeatedly to select the

manual tuning mode.

Each time the button is pressed, the following three tuning
modes are selected cyclically.

® Preset tuning mode: The preset number flashes.

(D

Auto search mode: “SEARCH” is displayed.

(D

Manual tuning mode: “SEARCH" is not displayed and

the preset number does not flash.

Frequency

SEARCH

: : ■■...■• :

|L—

When an FM stereo broadcast contains noise

Press

MONO TUNER on the remote control while pressing SHIFT

so that “MONO” appears on the display.
Noise is reduced, although reception is monaural.

MONO

J

ROCK

00'

To restore stereo reception, press

MONO TUNER on the remote

control while pressing

SHIFT so that “MONO” disappears.

To change the AM tuning interval
The default setting of the AM tuning interval is 10 kHz/step. If
you use this unit in an area where the frequency allocation system
is 9 kHz/step, change the tuning interval.

Press

POWER while pressing ► on the unit.

To reset the interval, repeat this procedure.

NOTE

Preset number

The preset tuning mode is skipped if no station is preset.

When the AM tuning interval is changed, all preset stations are
cleared. The preset stations have to be set again.

Turn MULTI JOG clockwise or counter-clockwise
to tune in to a station.

The frequency changes as you turn

MULTI JOG. When a

station is received, “TUNE” is displayed for 2 seconds.

During FM stereo reception, (d®!)) is displayed.

{|ias)i)

TUNE

■ DOWN and ►►UP are also available to tune in to a

station.

10

ENGLISH

Advertising