Aiwa Z-L31 - Manual (Page 13)

NOTE
' When loading an 8-cm ^3-inch^ disc, make sure to place it onto
the inner circle of the trav precisely. Otherwise, the disc may
be damaged or the disc compartment will not open. If it does
not open, please consult your Aiwa deaier for repair.
■ Do not piace more than one compact disc on one disc tray.
' Do not tilt the unit with discs loaded. Doing so may cause
malfunctions.
' When transporting the unit, remove the discs from the trays.
' When replacing the discs during play, do not replace discs other
than those facing you.
If you place a disc on the empty right inner tray, and then press
A OPEN/CLOSE, “ERROR” is displayed and the disc
compartment may not close. Remove the disc on that tray.
' Do not use irregular shape CDs (example; heart-shaped,
octagonal ones). It may result in malfunctions.
Never place here.
RANDOM /REPEAT PLAY
Use the remote control.
RANDOM play
All the tracks on the selected disc or all the discs can be played
randomly.
REPEAT play
A single disc or all the discs can be played repeatedly.
Press RANDOM/REPEAT while pressing SHIFT.
Each time it is pressed, the function can be selected cyclically.
RANDOM play — RANDOM lights up on the display.
REPEAT play — Ci. lights up on the display.
RANDOM/REPEAT play — RANDOM and light up on the
display.
Cancel — RANDOM and c^. disappear from the dispiay.
To play all discs, press ► to start play.
To play a single disc, press one of DISC DIRECT PLAY 1-5 to
start play.
To select disc 4 or 5 from the remote control, press
DISC DIRECT
PLAY 4 or 5 while pressing SHIFT.
BLANK SKIP PLAY
The silent portions between tracks recorded on a CD can be
skipped during playback.
F’ress CD BLANK SKIP on the main unit.
“CD BLANK SKIP ON” is displayed and a small dot will appear
in the display.
0
z
1
a.
Q
O
>CD BLHt-iK
Small dot
2 Press ► to start playback.
The silent portions between tracks will be skipped, and the
sound will be played back without interruption. If a track fades
out (ends with the sound gradually decreasing), the fadeout
portion will also be skipped.
To return to normal playback
Press CD BLANK SKIP again. “CD BLANK SKIP OFF” is
displayed and the dot in the display will disappear.
• There may be a case where BLANK SKIP PLAY does not
function correctly.
• BLANK SKIP PLAY is automatically canceled when performing
Al EDIT RECORDING (page 16), PROGRAMMED EDIT
RECORDING (page 17), or recording during PROGRAMMED
PLAY (page 14) or RANDOM PLAY (page 13).
• When you press CD BLANK SKIP to turn on/off the flash
window, the BLANK SKIP PLAY is also switched to ON/OFF.
NOTE
During random play it is not possible to skip to the previously
played track with
ENGLISH
13