1 press prgm while pressing shift in stop mode, To check the program, To add tracks to the program – Aiwa Z-L31 User Manual

Page 14: To change the programmed tracks, To play the programmed tracks repeatedly, 4 repeat steps 2 and 3 to program other tracks, 5 press ► to start play

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

Up to 30 tracks can be programmed from any of the inserted

discs.

Use the remote control.

1 Press PRGM while pressing SHIFT in stop mode.

“—” is displayed .

i ............. 0;;00

:

To check the program

Each time ◄◄ or ►► is pressed in stop mode, a disc number,

track number, and program number wiii be displayed.

To clear the program

Press ■

CLEAR in stop mode.

To add tracks to the program

Repeat steps 2 and 3 in stop mode. The track will be programmed

after the last track.

To change the programmed tracks

Clear the program and repeat all the steps again.

To play the programmed tracks repeatedly
After programming the tracks, press

RANDOM/REPEAT

repeatedly while pressing

SHIFT until appears on the display.

NOTE

• During programmed play, you can not use random play, check

the remaining time or select a track.

• “FULL” is displayed if you attempt to program more than 30

tracks.

2 Press one of DISC DIRECT PLAY 1-5 to select a

disc.

To select disc 4 or 5, press

DISC DIRECT PLAY 4 or 5 while

pressing

SHIFT.

Go to the next step when the tray stops rotating.

3 Press numbered buttons 0-9 and +10 to program

a track.

Example:

To select the 25th track, press +10, +10 and 5.
To select the 10th track, press +10 and 0.

Selected track number

Total number of selected tracks

I

....... F.; .=.

' !.!. :r .j .L y

Program number

Total playing time of the
selected tracks

4 Repeat steps 2 and 3 to program other tracks.

5 Press ► to start play.

14

ENGLISH

Advertising