Ogrammed edit recordi, Al edit recording – Aiwa CX NMA545 User Manual

Page 19

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

OGRAMMED EDIT RECORDI

In the programmed edit recording function the tracks can be

programmed while checking the remaining time on each side of
the tape.

The programmed edit recording will not start from a point halfway
in the tape. The tape must be recorded on from the beginning of
either side.

1

Insert the tape into deck 2.

Insert the tape with the side to be recorded on first facing out

from the unit.

2

Press CD and load the disc(s).

3

Press CD EDIT/CHECK twice.

“EDIT” and “PRGM” are displayed.
• When “Al” is displayed, press

CD EDIT/CHECK

again.

4

Press numbered buttons on the remote control

to designate the tape length.

10 to 99 minutes can be specified.

• The ◄◄, ►► or

MULTI JOG

are also available to designate

the tape length.

Tape length

Tape side A (front side)

..60

......3 0 " 00

Maximum recording
time for side A

5 Press DISC DIRECT PLAY 1-3 to select a disc.

Then, press numbered buttons 0-9 and +10 on

the remote control to program a track.

Example: To select the 10th track of disc 2, press

DISC

DIRECT PLAY 2,

then press

+10

and

0.

Selected track number

■■■■■■■■I H..\:;:=.l.

Remaining

time

Programmed

on side A

tracks

o

■ .s;!. -.J

6

Repeat step 5 for the rest of the tracks for side

A.

A track whose playing time is longer than the remaining time
cannot be programmed.

7 Press CD EDIT/CHECK to select side B and

program the tracks for side B.

After confirming “B” on the display, repeat step 5.

Tape side B (reverse side)

....... ; i - U0

........................

8 Press CD EDIT/CHECK to select side A and press

# REC/REC MUTE to start recording.

The tape is rewound to the beginning of the front side, the
lead segment is played through for 10 seconds, and recording
starts. When the last track programmed for side A is finished,
deck 2 enters the recording stop mode. After entering the

recording stop mode, go to step 9.

9

Press CD EDIT/CHECK for recording of the

second side.

“B” is displayed.

10

Turn over the tape in deck 2 and press # REC/

REC MUTE to start recording.

Recording starts.

To stop recording

Press ■. Recording and CD play stop simultaneously.

To check the order of the programmed track numbers

Before recording, press

CD EDIT/CHECK

to select side A or B,

and press ◄◄ or ►► repeatedly.

Disc number

Track number

Programmed track
numbers

H p----pr:--=

Tape side

Program number

To change the program of each side

Press

CD EDIT/CHECK

to select side A or B, and press ■

CLEAR

to clear the program on the selected side. Then program

tracks again.

To clear the edit program

Press ■

CLEAR

twice so that “EDIT” disappears on the display.

' Up to 30 tracks can be programmed from any of the inserted

discs.

■ “FULL” is displayed if you attempt to program more than 30

tracks.

a

z

5

K

o

o

UJ

• m

Program number

ENGLISH

19

Advertising
This manual is related to the following products: