1 set the function switch to tape/power6 standby, 2 insert the playback cassette into deck 2, 3 insert the dubbing cassette into deck 1 – Aiwa CD-DW420 U User Manual
Page 22: 4 press the iipause button of deck 1, 5 press the #rec button of deck 1, To stop dubbing, 1dubbing a tape
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
HI-SPEED
1
DUBBING A TAPE
2
7
POWER
©STANDBY RADIO
TAPE —•I.—CD
W"
• Recording is done on the side facing the cassette holder.
• Use only Type I (normal) tapes.
1 Set the FUNCTION switch to TAPE/POWER6
STANDBY.
2 Insert the playback cassette into deck 2.
@ The side to be played back
3 Insert the dubbing cassette into deck 1.
@ The side to be recorded
4 Press the IIPAUSE button of deck 1.
5 Press the #REC button of deck 1.
The ►PLAY button is pressed automatically.
Deck 1 enters the recording pause mode.
6 Press the DUBBING SPEED button to select a
dubbing speed.
For dubbing at high speed, press the button until the HI-SPEED
DUBBING indicator lights up.
For dubbing at normal speed, press the button until the HI-
SPEED DUBBING indicator goes out.
7 Press the ^PLAY button of deck 2 to start
dubbing.
To stop dubbing
Press the B/ASTOP/EJECT button of deck 1.
REC PLAY
PLAY
22