Adcom GTP-740 User Manual
Page 20
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
29
AC convenience outlets (115VAC models)
These outlets are for low-current source components only. They are not
designed for power amplifiers.
'“The single unswitched outlet is live whenever the GTP-740 is plugged into a live AC source. The
two switched outlets are live only when the GTP-740 is fully operational (i.e., whenever the front
power button’s LED is red.) They are not live when the GTP-740 is in standby mode (when the
LED is yellow.)
Observe the wattage limitations printed above the two switched and one unswitched outlets. Note
that the 500VA figure (equivalent to 500 watts) above the two switched outlets is a maximum
figure for both outlets combined. Do not exceed this limit.
We strongly recommend the use of our switched power line conditioner, the ADCOM ACE-
515, for systems with substantial amplifiers and many source components. In addition to
relieving the GTP-740 from handling large current surges, the ACE-515 protects your entire
system by filtering and conditioning the AC current. In addition to numerous heavy duty
AC outlets, the ACE-515 includes sequential power-up and power-down modes to minimize
“thumps” whenever you turn your system on or off._____________________________________
19