Adcom GTP-740 User Manual
Page 25
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
51
52
53
54
55
56
Sub Up
•
In mam mode, button is preprogrammed to increase subwoofer level.
•
In CD mode, button is preprogrammed to access disc 4 with ADCOM disc player.
•
The button is programmable for use with any other source.
.*Sub Down
•
In main mode, button is preprogrammed to decrease subwoofer level.
•
The button is programmable for use with any other source.
Bal. chk (balance check)
•
In main mode, button is preprogrammed to initiate balance check procedure with test tone
and BALANCE CHECK menu screens.
•
In CD mode, button is preprogrammed to access disc 5/Memory Clear with ADCOM disc
player.
•
The button is programmable for use with any other source.
Dim
In main and tuner modes, button is preprogrammed to dim GTP-740’s information display.
The button is programmable for use with any other source.
Ml, M2, M3, M4 (Macro keys)
Ml
•
In main mode, button is preprogrammed to select Tape 2 input (not applicable to GTP-740.)
•
The button is programmable for use with any other source.
M2
•
In main mode, button is preprogrammed to select Video 4 input (not applicable to GTP-740.)
•
The button is programmable for use with any other source.
M3 and M4
•
These buttons are programmable for use with any source.
Room 2
•
In main mode, button is preprogrammed to select a Room 2 source.
•
The button is programmable for use with any other source.
Backlight
•
No programming capabilities. Button backlights all keys for eight (8) seconds when pressed.
Mute
•
In main, tuner, and CD modes, button is preprogrammed to mute outputs of device.
•
The button is programmable for use with any other source.
24