Adcom GTP-740 User Manual
Page 3
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
SAFETY NOTIFICATION PAGE
This equipment generates and uses radio frequency energy and if not installed and used
properiy (that is. in strict accordance with the manufacturer's instructions), may cause
interference to radio and television reception. It has been type tested and found to
comply with the specifications Subpart J of Part 15 of FCC rules, which are designed to
provide reasonable protection against such interference in a residential installation.
However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause interference to radio or television reception, which can be
determined by turning the equipment on and off, the user is encouraged to try to correct
the interference by one or more of the following measures.
• reorient ttie receiving antenna
• relocate the processor with respect to the receiver
• move the processor away from the receiver
• plug the processor into a different outlet so that the processor and receiver
are on different branch circuits.
If necessary, the user should consult the dealer or an experienced radio/television
technician for additional suggestions. The user may find the following booklet prepared
by the Federal Communications Commission helpful; "How to identify and Resolve Radio-
TV Interference Problems". This booklet is available from the US Government Printing
Office, Washington, DC, 20402, Stock No. 004-000-00345-4.
Caution — Use of controls or adjustments, or performance of procedures other than those specified herein may
result in hazardous radiation exposure.
Caution — To prevent electrical shock, do not use the polarized plug with an extension cord or receptacle, or other
outlet, unless the blades can be fully inserted to prevent blade exposure.
Attention— Pour prévenir les chocs électriques ne pas utiliser cette fiche polarisée avec un prolongateur, une
prise de courant ou une autre sortie de courant, sauf si les lames peuvente être insérées à fond sans laisser
aucune partie a décourvert.
Explanation of Graphic Symbols
This "lightning flash with arrowhead" symbol is intended to alert the user of the presence of uninsulated
"dangerous voltage" within the product’s enclosure that may be of sufficient magnitude to constitute a risk of
electric shock to persons.
The “exclamation point” symbol is intended to alert the user to the presence of important operating and
maintenance (servicing) instructions in the literature accompanying the appliance.