2 device id, Device id, Figure 2-6 – ADLINK USB-1210 User Manual
Page 29: Usb-1210 module in windows device manager
Advertising
Getting Started
19
USB-1210
Figure 2-6: USB-1210 module in Windows Device Manager
If the USB-1210 module cannot be detected, the power provided
by the USB port may be insufficient. The USB-1210 module is
exclusively powered by the USB port and requires 460 mA @ 5 V.
2.5.2
Device ID
A rotary control on the rear of the module (as shown) controls
device ID setting and can be set from 1 to 8. The device ID allows
dedicated control of the USB-1210 module irrespective of the con-
nected USB port. When more than one USB module of the same
Advertising