ADLINK cExpress-BL - Manual (Page 53)

cExpress-BL Page 53
Feature Options Description
CPU C7 Report Disabled
CPU C7
CPU C7S Enable / Disable CPU C7 report to OS.
C1 State auto undemotion Disabled
Enabled Un-demotion from Demoted C1
C3 State auto undemotion Disabled
Enabled Un-demotion from Demoted C3
ACPI T State Disabled
Enabled Enable / Disable ACPI T state support.
CPU DTS Disabled
Enabled Enable / Disable CPU DTS.
7.3.2 Advanced > Memory Submenu
Feature Options Description
Memory RC Version Info only Display Memory Reference Code Version.
Memory Frequency Info only Display Memory Frequency.
Total Memory Info only Display Total Memory.
Memory Voltage Info only Display Memory Voltage.
DIMM#0/1 Info only Display DIMM#0/1.
CAS Latency (tCL) Info only Display CAS Latency (tCL).
Minimum delay time Info only Display Minimum delay time.
CAS to RAS (tRCDmin) Info only Display CAS to RAS (tRCDmin).
Row Precharge (tRPmin) Info only Display Row Precharge (tRPmin).
Active to Precharge (tRASmin) Info only Display Active to Precharge (tRASmin).
XMP Profile 1 Info only Display XMP Profile 1 support or not.
XMP Profile 2 Info only Display XMP Profile 2 support or not.
SPD Write Protect Enabled
Disabled Enable:Writes to SMBus slave addresses A0h - AEh are disabled.
Memory Frequency Limiter Auto Maximum Memory Frequency Selections in Mhz.
Max TOLUD Dynamic Maximum Value of TOLUD. Dynamic assignment would adjust TOLUD
automatically based on largest MMIO length of installed graphic controller.
MRC Fast Boot Enabled
Disabled Enable / Disable MRC fast boot.
Memory Remap Enabled
Disabled Enable / Disable e memory remap above 4G.
Memory Thermal Management Enabled
Disabled Enable / Disable Memory Thermal Management.
7.3.3 Advanced > Graphics Submenu
Feature Options Description
Graphics Configuration Info only
IGFX VBIOS Version Info only Display VBIOS Version.