ADLINK cExpress-BL - Manual (Page 61)

cExpress-BL Page 61
Feature Options Description
SENFE Disable
Enable Enable / Disable Root PCI Express System Error on Non-Fatal Error.
SECE Disable
Enable Enable / Disable Root PCI Express System Error on Correctable Error.
PME SCI Disable
Enable Enable / Disable PCI Express PME SCI.
Hot Plug Disable
Enable Enable / Disable PCI Express Hot Plug.
PCIe Speed Auto
Gen1
Gen2 Select PCI Express port speed.
Detect Non-Compiance Disable
Enable Detect Non-Compliance PCI Express Device. If enable, it will take more
time at POST time.
Extra Bus Reserved 0 Extra Bus Reserved (0-7) for bridges behind this Root Bridge.
Reseved Memory 10 Reserved Memory Range for this Root Bridge.
Prefetchable Memory 10 Prefetchable Memory Range for this Root Bridge.
Reserved I/O 4 Reserved I/O (4K/8K/12K/16K/.../48K) Range for this Root Bridge.
PCIE LTR Disable
Enable PCIE Latency Reporting Enable/Disable.
PCIE LTR Lock Disable
Enable PCIE LTR Configuration Lock.
Snoop Latency Ocerrid Disable
Manual
Auto Snoop Latency Ocerride for PCH PCIE.
Non Snoop Latency Ocerrid Disable
Manual
Auto Non Snoop Latency Ocerride for PCH PCIE.
7.3.13 Advanced > Super IO Submenu
Feature Options Description
Super IO Chip Info only
W83627DHG Super IO Configuration Info only
Serial Port 1 Configuration
Serial Port
Device Settings
Change Settings
Enabled
Disabled
IO=3F8h; IRQ=4
Auto
IO=3F8h; IRQ=4
IO=3F8h; IRQ=3,4,5,6,7,10,11,12
IO=2F8h; IRQ=3,4,5,6,7,10,11,12
IO=3E8h; IRQ=3,4,5,6,7,10,11,12
IO=2E8h; IRQ=3,4,5,6,7,10,11,12
Enable / Disable Serial Port (COM).
Fixed configuration of serial port.
Select an optimal setting for super IO device.