ADLINK cExpress-BL - Manual (Page 56)

Page 56 cExpress-BL
Feature Options Description
RAID1 Enabled
Disabled Enable / Disable RAID1 feature.
RAID10 Enabled
Disabled Enable / Disable RAID10 feature.
RAID5 Enabled
Disabled Enable / Disable RAID5 feature.
Intel Rapid Recovery Technology Enabled
Disabled Enable / Disable Intel Rapid Recovery Technology.
OROM UI and BANNER Enabled
Disabled If enabled, then the OROM UI is shown. Otherwise, no OROM banner or
information will be displayed if all disks and RAID volumes are Normal.
HDD Unlock Enabled
Disabled If enabled, indicates that the HDD password unlock in the OS is enabled.
LED Locate Enabled
Disabled If enabled, indicates that the LED/SGPIO hardware is attached and ping to
locate feature is enabled on the OS.
IRRT Only on ESATA Enabled
Disabled If enabled, then only IRRT volumes can span internal and eSATA drives. If
disabled, then any RAID volume can span internal and eSATA drives.
Smart Response Technology Enabled
Disabled Enable / Disable Smart Response Technology.
OROM UI Delay 2 Seconds
4 Seconds
6 Seconds
8 Seconds If enabled, indicates the delay of the OROM UI Splash Screen in a normal
status.
7.3.5 Advanced > SATA > Intel® Rapid Start Technology
Feature Options Description
Intel (R) Rapid Start Disabled
Enabled Enable / Disable Intel (R) Rapid Start.
7.3.6 Advanced > SATA > SATA Port Configuration
Feature Options Description
SATA Port Configuration Info only
Port X Disabled
Enabled Enable / Disable SATA Port.
Hot Plug Disabled
Enabled Designates this port as Hot Pluggable.
Mechanical Presence Disabled
Enabled Controls reporting if this port has an Mechanical Presence Switch.\n\nNote:
Requires hardware support.
External SATA Disabled
Enabled External SATA Support.
SATA Device Type Hard Disk Drive
Sold State Drive Identify the SATA port is connected to Solid State Drive or Hard Disk Drive.
Spin up Device Disabled
Enabled On an edge detect from 0 to 1, the PCH starts a COMRESET initialization
sequence to the device.