ADLINK cExpress-BL - Manual (Page 64)

Page 64 cExpress-BL
7.3.17 Advanced > Serial Port Console > Console Redirection
Feature Options Description
Console Redirection Settings Info only
Terminal Type VT100
VT100+
VT-UTF8
ANSI Emulation: ANSI: Extended ASCII char set. VT100: ASCII char set.
VT100+: Extends VT100 to support color, function keys, etc. VT-UTF8:
Uses UTF8 encoding to map Unicode chars onto 1 or more bytes.
Bits per second 9600
19200
38400
57600
115200 Selects serial port transmission speed.
Data Bits 7
8 Select Data Bits.
Parity None
Even
Odd
Mark
Space Select Parity.
Stop Bits 1
2 Select number of stop bits.
Flow Control None
Hardware RTS/CTS Select flow control.
VT-UTF8 Combo Key Support Disable
Enable Enable VT-UTF8 Combination Key Support for ANSI/VT100 terminals.
Recorder Mode Disable
Enable With this mode enabled only text will be sent. This is to capture Terminal
data.
Resolution 100x31 Disable
Enable Enables or disables extended terminal resolution
Legacy OS Redirection 80x24
80x25 On Legacy OS, the Number of Rows and Columns supported redirection
Putty KeyPad VT100
LINUX
XTERMR6
SCO
ESCN
VT400 Select FunctionKey and KeyPad on Putty.
Redirection After BIOS Post Always Enable
BootLoader The Settings specify if BootLoader is selected than Legacy console
redirection is disabled before booting to Legacy OS. Default value is Always
Enable which means Legaacy console Redirection is enabled for Legacy
OS.
7.3.18 Advanced > Thermal Submenu
Feature Options Description
Thermal Info only
Automatic Thermal Reporting
Enabled
Disabled Configure _CRT, _PSV and _AC0 automatically based on values
recommended in BWG’s Thermal Reporting for Thermal Management