Austroflamm Polly - Manual (Page 45)

Polly 43 english
4 Use of the control panel
4.1 Control panel
Figure 10: Control panel
Note
Always keep the control panel clean for optimum performance. Spots on the keys, e.g. from grease, can
trigger a signal as if a key was being pressed.
The touch-control panel is intuitively designed. Display symbols for various alarms are located along the
upper edge of the control panel, timer operation and the menus.
The display shows the set or current values for the presently selected menu option. The keys serve to
navigate through the menu and control operation of the control unit. A description of the keys can be
found in
Tabelle 1: Tasten des Bedienfelds on page 44.
The control panel also has a buzzer that provides feedback signals to the control panel. The following
acoustic signals are possible:
•
Short, high-pitched tone: Signals during navigation through the menu and editing of the settings.
•
Long, low-pitched tone: Signals an improper action (e.g. wrong key pressed).
•
Long, high-pitched tone: In case of an alarm, this tone is signaled at the volume set by the user.
Contrarily, in case of an error the tone signals at full volume.
A description of the alarms and errors can be found in Chapter Fehlerbehebung on Page 50.
englisch