Austroflamm Polly - Manual (Page 50)

english 48 Polly
In order to activate or deactivate operation of the fire chamber with the weekly switching programs, call up
the Time menu by pressing the menu key. Then, press the Edit key to select the entry "Weekly timer
ON/OFF
" . Press the Enter key and switch the weekly timer either ON or OFF. If you deactivate the
weekly timer, manually configure operation of the fire chamber.
4.8 Changing of the setup options
In the "Setup" menu you can set the options for:
[ 1 ]… "Key lock"
[ 2 ]… "Idle display brightness"
[ 3 ]… "Idle display mode"
[ 4 ]… "Beeper volume", and
[ 6 ]… "Manual feed"
.
With the "Key lock
" option the control panel can be locked so that no unintentional changes can be made
to the settings. When the key lock is activated you can navigate through the menu and display the current
values, but you cannot edit any the of settings, however, with the exception of the key lock itself. The Key
lock setting offers the following options:
- OFF: The key lock is deactivated, all keys can be actuated.
- Lo: The Edit mode is deactivated (the Enter key is locked).
- Hi: The Edit mode and on/off function are deactivated (the Enter key and ON/OFF key are
locked).
Tip!
We recommend that you activate the key lock before cleaning the control panel.
You can increase or decrease the brightness of the display in the idle state to save energy. As soon as
you touch the control panel the brightness of the display increases to the standard the value.
The "Idle display mode" setting offers the following options:
- OFF: The control panel remains in the selected menu. If the Edit mode was active, the changes
are rejected and the Edit mode is departed.
- Option 1: The control panel departs the current menu and alternately displays the current ambient
temperature and time.
- Option 2: The control panel departs the current menu and opens the "Temperature" menu. The
current ambient temperature is then shown on the display.
- Option 3: The control panel departs the current menu and opens the "Clock" menu. The current
time is then shown on the display.
The "Beeper volume" setting controls the volume of the acoustic signals of the control panel.
With the "Manual feed" option the pellet feed can be manually started. The feed supply operates briefly
and then stops. With this option you can clean, empty or refill the feed supply components.
To show the current setup options, go through the menu by pressing the menu key for the menu "Setup".
The set display brightness in the idle state is shown. With the Edit keys you can show the settings of the
englisch