Austroflamm Polly - Manual (Page 48)

english 46 Polly
4.3 Navigating through the menu
You can navigate through the first menu level using the left and right arrow keys. The symbol for the
selected menu lights up. The setting for the first submenu option is shown on the display.
Using the plus and minus keys, you can navigate upward or downward in the second menu level (the
submenu). The menu structure shown in Figure 2 is reversed, so that it looks as if you would navigate
downward in the menu; actually, you navigate upward. To simplify navigation through the second menu
level, the number of the respective menu options is shown shortly in brackets.
To change a setting in the menu, press the Enter key. This activates the Edit mode for the selected
setting. The displayed value begins to blink. Change the value using the plus and minus keys. You can
navigate through the steps in the Edit mode using the left and right arrow keys. In conclusion, press the
Enter key to save the setting and exit the Edit mode. The menu option which you edited is then shown
again on the display.
The display shows either the set or actual value, depending on the setting. When changing the
temperature, for example, enter the desired ambient temperature. After you have left the Edit mode, the
actual temperature will be shown on the display (which can differ from the set temperature).
To call up the third menu level, press the Enter key. You can then go from one menu option to another by
using the plus or minus keys. The procedure for changing the settings is the same as for the second
menu level.
To exit the Edit mode without saving the changes, press the Cancel key. With this key you can also return
to a previous level in the menu. If, for instance, you are editing program 3 under the menu option "Weekly
Timer Periods", you can reject the changes with Cancel key and return to program 3. By pressing the
Cancel key you go to "Weekly Timer Periods", then to "Clock" and finally to "Burning Power" under the
"Power" menu.
4.4 Setting the clock
You can set the current time and date by means of the control panel. To show the current time, go
through the menu by pressing the menu key for the menu "Time". The current time is then shown on the
display.
To set the current time and date, in the "Time" menu press the Enter key. The hour value starts blinking.
Set the desired hour using the edit keys. Then press the right menu key. The minute value starts blinking.
Set the desired minutes. Press the right menu key and set the date in the same manner. The date format
is specified as DD.MMM.YYYY Then press the right menu key and set the day of the week. Select
corresponding number between 1 (Monday) and 7 (Sunday). Confirm the time and date settings by
pressing the Enter key.
4.5 Setting the ambient temperature
The control unit offers two possibilities for setting the ambient temperature. These are:
- Use of weekly switching programs
- Manual setting or changing of the ambient temperature
With the aid of the weekly switching program you can automate operation of the fire chamber so that very
little or no user intervention is necessary. For detailed information, see Chapter Einstellen der
Wochenschaltprogramme on Page 8.
You can also manually set or change the ambient temperature. By using the weekly switching program
you can temporarily override the program settings. The program settings will be reset if certain conditions
specified for the timer have been fulfilled (for example, if the end time has been reached and the fire
chamber switches off).
englisch