Bonaire Navigator Controller - Manual (Page 31)

Multi-Appliance Navigator Control
Navigator Control
Page 31
Ducted Evaporative Air Conditioning
26. USING YOUR NAVIGATOR CONTROLLER
Your Navigator Controller will operate your ducted evaporative air
conditioner in 4 ways Manual, Thermo, Boost and Fan.
NOTE: Your Navigator Controller is designed to automatically detect
the appliances you have installed. Controller options not required for
your appliances will usually not be visible on your Navigator
Controller display. So not all icons may be shown on your Navigator
Controller, only available options
MANUAL
MODE
1. Turn the Navigator Controller ON by pressing the ON/OFF button.
If there is only an evaporative ducted air conditioner fitted, the
Navigator Controller will display the COOL icon.
2. Press the MODE button until the Manual icon appears on the
display and press the ENTER button to select Manual mode.
3. Press the or button to decrease or increase fan speed.
Your Navigator Controller provides 7 levels operation.
4. To turn the unit OFF press the ON/OFF button.
THERMO MODE
1. Turn the Navigator Controller ON by pressing the ON/OFF button.
If there is only an evaporative ducted air conditioner fitted, the
Navigator Control will display the COOL icon.
2. Press the MODE button until the Thermo icon appears on the
display and press the ENTER button to select the Thermo mode.
3. Press the or button to decrease or increase the
temperature. Minimum bars = warmer, Maximum bars = cooler.
•
Set the temperature scale to a relative point where you feel
comfortable.
•
The fan will now adjust itself up and down according to the
relative comfort level automatically.
•
As the room temperature nears the selected comfort level, the
water pump will turn off with the fan still running. The fan will
only stop if the room temperature is more than 1 degree
below the required comfort level.
4. To turn the unit OFF, press the ON/OFF button.