Ditch Witch RT55 - Manual (Page 54)

RT55 T4i Operator’s Manual
Operation Overview - 53
Sawing
CMW
Sawing
1. Start unit. See page 62.
2. Position tractor and controls. See page 92.
3. Begin sawing. See page 94.
4. Complete the installation. See page 94.
5. Backfill the trench. See page 114.
6. Shut down tractor. See page 64.
Drilling
1. Start unit. See page 62.
2. Dig approach trench and target trench. See page 103.
3. Assemble drill string and position tractor. See page 103.
4. Begin drilling. See page 104.
5. Use drill string guide as needed. See page 104.
6. Add rod. See page 105.
7. Backream. See page 105.
8. Shut down tractor. See page 64.
9. Disassemble joints. page 106.
Digging with Backhoe
1. Start unit. See page 62.
2. Set stabilizers and unstow backhoe. See page 98.
3. Excavate. See page 99.
4. Stow backhoe properly. See page 100.
5. Shut down tractor. See page 62.
Leaving Jobsite
1. Backfill if necessary. See page 114.
2. Rinse equipment. See page 114.
3. Stow tools. See page 114.
4. Haul equipment away from jobsite. See page 72.