Procedure, Rt55 t4i operator’s manual – Ditch Witch RT55 User Manual

Page 76

Advertising
background image

RT55 T4i Operator’s Manual

Transport - 75

Tow

CMW

Tow

Under normal conditions, tractor should not be towed. If tractor becomes disabled and towing is
necessary:

Do not tow for more than 200 yd (180 m).

Tow at less than 1 mph (1.6 km/h).

Use maximum towing force of 1.5 times unit weight.

Procedure

1.

Attach tow line to all available tie-down points
facing towing vehicle.

2.

Block the wheels.

3.

Disconnect drive lines from front and rear
differentials:

Remove four bolts that mount front driveline to
front differential.

Remove four bolts that mount rear driveline to
rear differential.

Use rope or chain to tie up drivelines so that
they do not drag.

4.

Fasten and adjust seat belt.

5.

If engine will run, start tractor so that power
steering is available while towing.

6.

Remove blocks.

7.

After towing, remove rope or chain, block the
wheels, and reconnect drivelines to differentials.

Incorrect procedures could result in death, injury, or property damage.

Learn to use equipment correctly.

Advertising