Ditch Witch RT55 - Manual (Page 75)

Transport - 74
RT55 T4i Operator’s Manual
Haul
CMW
Unload
1. Lower trailer or ramps.
2. Remove chains from tiedowns.
3. Fasten and adjust seat belt.
4. Start tractor. See page 62 for proper start-up procedures.
5. Raise attachments, but keep them low and centered.
6. Disengage parking brake and verify parking brake indicator is off.
7. Slow engine to low throttle and slowly back unit down trailer or ramps.
Crushing weight. If load falls or moves it could kill or crush you. Use
proper procedures and equipment or stay away.
NOTICE:
• Attach trailer to tow vehicle before loading or unloading.
• Load and unload trailer on level ground.
• Put manual transmission into first or reverse gear or automatic transmission into park. Turn off
ignition. Set parking brake.
• Block trailer wheels.
• Incorrect loading can cause trailer swaying.
Rollover possible. If machine rolls over, you could be thrown from seat
and killed or crushed. Wear seat belt.