Position tractor, Attach product, Rt55 t4i operator’s manual – Ditch Witch RT55 User Manual
Page 86
Advertising
RT55 T4i Operator’s Manual
Plow - 85
Setup
CMW
Position Tractor
1.
Fasten and adjust seat belt.
2.
Start tractor. See page 62 for start-up procedures.
3.
Drive to starting point. Move in line with planned trench. See page 64 for operating procedures.
4.
Lower backfill blade.
5.
Engage parking brake.
6.
Lower plow to starting point of trench.
7.
Turn ignition switch to STOP.
Attach Product
To Pull Product
1.
Insert material into pulling grip.
2.
Tape grip with duct tape.
IMPORTANT: If material must be at a constant depth, dig starting and target trenches.
Advertising