Ditch Witch RT100 - Manual (Page 29)

Controls - 28
RT100 Powershift Operator’s Manual
Center Console
CMW
7. Steering column tilt
control
To adjust tilt, pull.
To secure steering column in position,
release.
IMPORTANT: Tilt steering
column up before pivoting
operator’s seat.
8. Dig/drive control
Selects dig or drive settings.
• To select dig, move forward. Use
this position for trenching.
• To select drive, move back. Use
this position for driving.
IMPORTANT: Before changing
between dig and drive settings,
do the following:
• Stop tractor.
• Move F-N-R lever into the
center or neutral position.
• Move hand throttle to low
idle.
9. Auxiliary outlet
Provides power for other equipment. Power output is 12V, 5A.
Item Description Notes
c00ic037w.eps