Ditch Witch RT100 - Manual (Page 4)

RT100 Powershift Operator’s Manual
Overview - 3
Intended Use
CMW
Intended Use
The RT100 is a riding trencher designed to install buried service lines of various sizes using a variety of
Ditch Witch attachments.
These units are designed for operation in temperatures typically experienced in earth moving and
construction work environments. Provisions may be required to operate in extreme temperatures. Contact
your Ditch Witch dealer.
Use in any other way is considered contrary to the intended use.
The RT100 should be used with genuine Ditch Witch chain, teeth, and sprockets. It should be operated,
serviced, and repaired only by persons familiar with their particular characteristics and acquainted with the
relevant safety procedures.
Equipment Modification
This equipment was designed and built in accordance with applicable standards and regulations.
Modification of equipment could mean that it will no longer meet regulations and may not function properly
or in accordance with the operating instructions. Modification of equipment should only be made by
competent personnel possessing knowledge of applicable standards, regulations, equipment design
functionality/requirements and any required specialized testing.
Attachment Max. trench width Max. trench depth*
M910 trencher 24” (610 mm) 100” (2.5 m)
M912 offset trencher 24” (610 mm) center 96” (2.4 m)
12” (305 mm) offset 96” (2.4 m)