Ditch Witch RT100 - Manual (Page 43)

Controls - 42
RT100 Powershift Operator’s Manual
Right Console
CMW
2. Rear steer switch To move rear tracks left, press top.
To move rear tracks right, press bottom.
NOTICE:
• Tracks move when you
press the switch. To stop
movement, release switch.
• Visually verify track position
3. Rear steer auto/
manual switch
To manually steer rear tracks, press top.
To center tracks, press bottom.
Use manual mode and the
manual rear steer switch to
bypass auto mode.
4. Frame tilt switch
To tilt right, press top.
To tilt left, press bottom.
5. Throttle
To increase speed when trenching, move
left.
To decrease speed when trenching, move
right.
IMPORTANT:
• With dig/drive control in dig,
increasing engine speed
also increases digging
chain speed. Foot throttle
control provides a
temporary override
(increase only) of the hand
throttle control setting.
• With dig/drive control in
drive, increasing engine
speed also increases
ground drive speed.
Item Description Notes