Ditch Witch RT100 - Manual (Page 79)

Transport - 78
RT100 Powershift Operator’s Manual
Haul
CMW
Unload
1. Lower trailer or ramps.
2. Check that parking brake is engaged and verify that parking brake indicator is on.
3. Check that speed/direction hand control is in neutral.
4. Check that dig/drive control is still in dig position and that F-N-R lever is still in neutral and set at 1
(low).
5. Remove chains from tiedowns.
6. Fasten and adjust seat belt.
7. Tilt steering column down.
8. Start tractor. See page 68 for proper start-up procedures.
9. Raise attachments, but keep them low.
10. Release parking brake and verify that parking brake indicator is off.
11. Slow engine to low throttle and slowly back unit down trailer or ramps.
Crushing weight. If load falls or moves it could kill or crush you. Use
proper procedures and equipment or stay away.
To help avoid injury:
• Attach trailer to tow vehicle before loading or unloading.
• Load and unload trailer on level ground.
• Put manual transmission into first or reverse gear or automatic transmission into park. Turn off
ignition. Set parking brake.
• Block trailer wheels.
Rollover possible. If machine rolls over, you could be thrown from seat
and killed or crushed. Wear seat belt.