Ditch Witch RT115 - Manual (Page 100)

RT115 Tier 3- PLOW ATTACHMENT
SETUP
100 RT115 Tier 3 - PLOW ATTACHMENT
SETUP
1. Fasten and adjust seat belt.
2. Start tractor. See TRACTOR for start-up procedures.
3. Drive to starting point. Move in line with planned trench. See
TRACTOR for operating procedures.
4. Engage parking brake and verify parking brake indicator is
on.
5. Lower backfill blade.
6. Lower plow to starting point of trench.
7. Turn ignition switch to STOP.
EMERGENCY SHUTDOWN - Turn ignition switch to STOP.
IMPORTANT: Plow blade will go into ground without
starting a trench, but using one allows for full-depth
starting.
1. Fasten and adjust seat belt.
2. Start tractor. See TRACTOR for start-up procedures.
3. Drive to starting point. Move in line with planned trench. See
TRACTOR for operating procedures.
4. Engage parking brake and verify parking brake indicator is
on.
5. Lower backfill blade.
6. Lower plow to starting point of trench.
7. Turn ignition switch to STOP.
EMERGENCY SHUTDOWN - Turn ignition switch to STOP.
IMPORTANT: Plow blade will go into ground without
starting a trench, but using one allows for full-depth
starting.