Ditch Witch RT115 User Manual
Page 172
RT115 Tier 3- SERVICE
10 HOUR SERVICE
172
RT115 Tier 3 - SERVICE
10 HOUR SERVICE
Lube Saw Wheel Shaft Bearings
Lube saw wheel shaft bearings every 10 hours with EPG.
Check Saw Bits
Check that saw bits rotate freely. Clean and check bits after each
use. If bits are stuck, remove and clean packed soil from retaining
ring.
Replace bit when carbide cap or insert is worn or adapter can be
damaged.
NOTICE: See welding notice at beginning of this chapter.
Lube Saw Wheel Shaft Bearings
Lube saw wheel shaft bearings every 10 hours with EPG.
Check Saw Bits
Check that saw bits rotate freely. Clean and check bits after each
use. If bits are stuck, remove and clean packed soil from retaining
ring.
Replace bit when carbide cap or insert is worn or adapter can be
damaged.
NOTICE: See welding notice at beginning of this chapter.