Ditch Witch RT115 Q - Manual (Page 56)

RT115Q Operator’s Manual
Operation Overview - 55
Drilling
CMW
Drilling
1. Start unit. See page 64.
2. Dig approach trench and target trench. See page 111.
3. Assemble drill string and position tractor. See page 111.
4. Begin drilling. See page 113.
5. Use drill string guide as needed. See page 114.
6. Add rod. See page 115.
7. Backream. See page 115.
8. Shut down tractor. See page 67.
9. Disassemble joints. See page 116.
Digging with Backhoe
1. Start unit. See page 64.
2. Set stabilizers and unstow backhoe. See page 104.
3. Excavate. See page 105.
4. Stow backhoe properly. See page 106.
5. Shut down tractor. See page 67.
Leaving Jobsite
1. Backfill if necessary. See page 124.
2. Rinse equipment. See page 124.
3. Stow tools. See page 124.
4. Haul equipment from jobsite. See page 76.