Ditch Witch RT115 Q - Manual (Page 84)

RT115Q Operator’s Manual
Trench - 83
Setup
CMW
1. If using optional trench cleaner, remove bolt installed for transport.
2. Fasten and adjust seat belt.
3. Start tractor. See page 64 for start-up procedures.
4. Drive to starting point. Move in line with planned trench. See page 66 for driving procedures.
5. Engage parking brake and verify parking brake indicator is on.
6. Move ground drive switch to low.
7. Turn seat to the desired position.
8. Engage axle lock.
9. Lower boom to just above ground.
10. Engage optional Trench Depth Meter, if equipped. See page 120.
11. Check that attachment speed/direction control is in neutral.
12. Check that boom is in line with planned trench.