Ditch Witch RT115 Q - Manual (Page 88)

RT115Q Operator’s Manual
Trench - 87
Operation
CMW
Finish Trenching
1. When trench is complete, move ground drive hand control to neutral.
2. Adjust throttle to low idle.
3. Raise boom.
4. As boom clears top of trench, move attachment speed/direction control to neutral.
5. Raise trench cleaner.
6. Swivel seat to the drive position.
7. Disengage axle lock.
8. Drive a short distance away from work site. See page 66 for driving procedures.
9. Shut down tractor. See page 67 for proper shutdown procedures.
10. Stow trench cleaner.
IMPORTANT: Drive tractor in reverse 6’ (2 m) while turning steering wheel left to right to fully
disengage axle lock.