Echelon LonPoint Module User Manual
Page 92
Advertising
8-8
Installing the AI-10 Analog Input Module
6. Securely attach the AI-10 module to the Base Plate by screwing the two Echelon
205-0130-01 screws (8-32 [M8], 3/8” [9.5mm]) into the threaded inserts in the
Base Plate. Use approximately 4 lbs. in/0.5Nm torque on the screws.
7. Follow the node configuration procedure described in the LonPoint Application
and Plug-In Guide
to configure the software in the AI-10 module.
8. See Troubleshooting for assistance with improper AI-10 module operation.
Advertising