Echelon Mini FX - Manual (Page 44)

Mini FX User's Guide 31
Figure 2.9 FT 5000 EVB Power Supply Connection
4. Connect the orange network connector on each FT 5000 EVB to the included network
cable.
Figure 2.10 FT 5000 EVB Network Connection
5. Use the included U10 USB Network Interface to attach the computer running the
Mini FX Application to the TP/FT-10 channel. To do this, connect the black network
connector on the network cable to the U10 USB Network Interface, and then plug the
U10 USB Network Interface into an available USB port on your computer. You can
use the included USB extension cable to help connect the USB 10 Network Interface
to your development computer.