Echelon Mini FX - Manual (Page 57)

44 Mini FX Quick-Start Exercise
Note: The current list of manufacturer IDs, device classes, usage values, and
channel types are defined in an XML file (spidData.xml) that is available at
www.lonmark.org/spid . This file is updated as L ON M ARK International adds
new manufacturer IDs, device classes, usage values, and channel types.
4. Click OK to return to the Mini FX Application. The program ID you specified in the
Standard Program ID Calculator dialog appears in the Standard Program
Identifier box.
5. Click Build to compile the application and create the application image files.
6. The status box at the bottom of the Application tab informs you when the
application has successfully been compiled, and it displays build errors (if any).
Figure 3-1 demonstrates that the device application in this quick-start exercise has
successfully been built. In addition, it displays the properties set in the Application
tab to build it.
Figure 3.1 Building the Device Application
7. If you receive any build errors, double-check that the code you entered matches that
listed in Step 2: Writing the Device Application (you may receive some warnings,
which can be ignored in the context of this quick-start exercise).