Echelon Mini FX - Manual (Page 71)

58 Using the Mini FX Application
Figure 4.4 Service Pin Message Dialog
The Neuron ID is a unique 48-bit (12-hex digit) identifier contained in every
L
ON W ORKS device. The Mini FX Application uses the Neuron ID to
communicate with your selected device. For more information on Neuron
IDs, see the Introduction to the L ON W ORKS Platform document in the
Echelon Mini FX program folder.
The program ID is a 16-hex-digit number that uniquely identifies the device
application. The program ID is displayed as eight pairs of hexadecimal
encoded digits, separated by colons. The 16 hex digits are organized as 6
fields (FM:MM:MM:CC:CC:UU:TT:NN) that identify the manufacturer,
classification, usage, channel type, and model number of the device. For
more information on program IDs, see the Program IDs section in Chapter 1.
c. Click Yes to register the device with the Mini FX Application.
d. The device is added to the Device list, which includes devices that you have
added. The device will remain in the Device list until you close the Mini FX
Application, or connect to a new network interface. You will need to add the
device again when you restart the Mini FX Application, or when you connect
to a different network interface.
• To manually register the device and select it, follow these steps:
a. Click Add. The Add Device dialog opens.
b. Either press the Service button on the device, or manually enter the 12-digit
Neuron ID in hexadecimal format.
c. Click OK.
d. The device is added to the Device list.
• To select a device that was registered during the current Mini FX Application
session with the currently selected network interface, select the device from the
Device list. You can also select a device that has automatically been discovered