Echelon Mini FX - Manual (Page 74)

Mini FX User's Guide 61
o
When you wink a PL EVB when it is running an example application LED1–
LED3 on the Mini Gizmo I/O Board turn on and LED4–LED8 blink rapidly for a
few seconds, and the TX and RX LEDs on the EVB quickly flash.
• Test. You can test a device to check its current status. After the test has been
completed, the Status box displays the current state of the device, as well as
statistics such as the number of packets received by the device, the number of
packets addressed to the device, and the number of missed or lost messages. Each
statistic displayed by the test will remain static when it reaches the maximum value
of 65,535. You can reset the device statistics after a test by clicking Reset.