Hanna Instruments HI 120 - Manual (Page 37)

37
When in SETUP mode, the following information can be printed:
• If 2nd then Print key are the first
keys pressed after entering SETUP
mode, a SETUP table of contents
will be printed:
• When exiting SETUP mode, the instrument asks if a SETUP REPORT
shall be print. The “Prn” message will be displayed on the LCD,
together with “ ” tag and “CFM” tag blinking.
INSTRUMENT SETUP
Calibration
Alarm Time Out
One-point cal
behaviour
pH Custom Buf.1
pH Custom Buf.2
Beep Alarms:
Alarm high
Alarm low
AutoLOG:
Start condition
End condition
Interval
Current Date
Current Time
Printing
Language
Printer ON/OFF
Beep ON/OFF
Baud rate
Command prefix
Instrument ID
Active Keys:
-next item
-prev. item
CAL-enter in
modifying mode
SET-exit SETUP
MODE-select
parameter
See also items
Help printings