Hanna Instruments HI 120 - Manual (Page 38)

38
LOG ON DEMAND
Instr ID 0002
Date 2004/10/15
Time 17:38:25
Sample No 5
pH 7.01
mV 0.0
°C 25.0
Offset 0.9mV
Slope 99.7%
• Press CFM to print the SETUP
REPORT or CAL to escape without
printing.
When in SETUP mode, if pressing CAL,
then Print for a chosen parameter, a
help printout will come out, providing
the following information (e.g. AutoLOG
Interval):
When in LOG mode, a printout will automatically come out, providing the
following information:
• For pH/mV Log on demand:
SET AUTOLOG
INTERVAL
(5s to 180min)
Active Keys:
-increment
-decrement
CAL-exit,no save
MODE-select
parameter
CFM-save & exit
SETUP REPORT
Instr ID 0002
Cal Time Out OFF
One-Cal Point
Pnt
Custom Buffer
Cb1 3.00
Cb2 Not defined
Date 2004/10/15
Time 16:25:31
Printer ON
Language ENG
Beep OFF
ALARM HIGH LIMIT
pH no
mV no
Rel mV no
ALARM LOW LIMIT
pH no
mV no
Rel mV no
AUTOLOG:
Interval 00:30
START Condition:
Date 2004/10/15
Time 16:20:00
END Condition:
Sample No 20