Harmonic Resolution Systems MXR Audio Stand - Manual (Page 4)

Safety Instructions
IMPORTANT WARNINGS!
Do not place any tall objects on the top shelf of the MXR Audio Stand. A tall object
is any object with a height that is greater than the length of the isolation base. A
tall object is also any object that has a height greater than its own width or length.
Tall objects must not be placed on top of the MXR Audio Stand for any reason.
The object may become unstable and tip over causing damage to the component,
adjacent objects, or injury to people.
Never lift or move the MXR Audio Stand with the shelves (M3 Isolation Bases)
installed. You should always move the MXR Audio Stand frame to its final location
prior to loading shelves and components. Moving the MXR Audio Stand frame
with the isolation bases installed (with or without equipment) can permanently
damage the systems adjustable feet or cause the shelves to fall out of the rack
resulting in potential damage or injury. Always take the time to remove all of the
equipment and shelves to relocate the MXR Audio Stand.
Do not lift the M3 Isolation Base (shelf) by the inner plate or the external feet
attached to the bottom of the rectangular frame. Always lift or move the isolation
base with the inner plate facing up and the external support feet facing down (same
orientation as when used to support your component). Always follow these
handling instructions to prevent personal injury or damage to the unit.