Harmonic Resolution Systems MXR Audio Stand - Manual (Page 6)

Photo 1 Photo 2
Lift the panel out of the crate by lifting vertically at each end (see Photo 2). Move
the panel and packing material directly to your damage free work surface. Once
at the work surface, remove and save the two fitted foam end support cushions.
Then open the protective paper covering the panel to expose the unit for assembly.
Saving all the packing material is critical to secure transportation of the frame in
the future. Shipping or moving the panel by any other means may expose the unit
to permanent damage.
Installation of Adjustable Foot System - Unwrap two of the four feet supplied with
the unit. Remove the screw and washer from each of the feet (see Photo 3).
Photo 3
Hands tighten the nut all the way down on each individual foot. Then back the nut
off one half rotation (see Photo 4).
Photo 4
Place the supplied washer on top of the nut and then screw each of the feet into the
threaded inserts on the bottom of the first vertical panel (see Photo 5 & 6). The
feet should be threaded into the insert until the washer/nut come in contact with the