Konig Electronic Digital video recorder with built-in 1 TB hard disk - Manual (Page 17)

ENGLISH
17
5�2�2 Record set
5�2�2�1 Record parameters
Picture 5-14
Click [Main menuRecordRecord Para] to enter
into the interface shown as Picture 5-14.
¾ Channel: allow you setup the channel you
desired.
¾ Record: allows you set up record status (Enable/
Disable) of each channel
¾ Pack Duration: indicates maximum continuous
record time (15, 30, 45 and 60 min).
¾ Pre-record: Motion detection and I/O triggered
record support Pre-record function.
5�2�2�2 Schedule
Picture 5-15
Click [Main MenuRecordSchedule] to enter into
the interface shown as Picture 5-15.
[Channel] option allows you select one channel you
desired.
To setup weekly schedules, tick-select the box of
the record status you want (Alarm, General, or No
Record) and then click on each box in the schedule
time line that you want this method to apply to. You
can use the [Copy – To] pull-down menus and Copy
button to copy settings from one day to another day
or all days.
After you complete the schedule you activate it by clicking the [Apply] button.
You can also click on the Default button to use the system defaults.
Explanation: Under the <record> menu and <search> menu, original color stands for no
record, “Red” stands for alarm record, “yellow” stands for Motion record and “Green” stands for
normal record.