Konig Electronic Digital video recorder with built-in 1 TB hard disk - Manual (Page 32)

ENGLISH
32
5�2�7 System
5�2�7�1 General
Click [Main MenuSystemGeneral] to enter into the interface shown as Picture 5-49
Picture 5-49
You will be allowed to modify system date/time,
date/time format, time zone, language, video format
and menu time out.
And click [DST Setup] button to enter into the below
interface shown as Picture 5-50, and you are allow to
configure DST status and mode.
¾ Click [NTP setup] to enter into the interface
shown as Picture 5-51 and now allow you enable/
disable the NTP function.
Picture 5-50 Picture 5-51
Note: The above [NTP function] change will be available only when system connected to
internet. And When NTP function is set to “Enable”, system will calibrate the time at every
00:07:50 and every start-up.
5�2�7�2 Users
Click [Main MenuSystemUsers] option and then enter into the interface shown as
Picture 5-51
Picture 5-52
Picture 5-53