Konig Electronic Digital video recorder with built-in 1 TB hard disk - Manual (Page 27)

ENGLISH
27
Picture 5-35
Friendly Reminder: The router’s port forwarding
interface may be different, however, when entering
into virtual server, user will always need forward port
(range: 1025~65535) of router to IP address of DVR
allocated or automatically captured, and select [All]
or [Both] in corresponding protocol column and save
the above setting.
Above steps may differ from the router device
depending on the manufacturer.
5�2�4�4 Sub stream
Go to [Main menuNetworkSub Stream] to enter into the interface shown as Picture 5-36
Picture 5-36
¾ Video: allow you open or close the sub stream
output. If you select “Enable” system will select
sub-stream preview and guarantee image quality
once network is unstable.
¾ Frame rate: allow you set net transmittal frame
rate. User could select the relative value by pull-
down menu.
¾ Bit rate: allow you set net transmittal bit rate.
User could select the relative value by pull-down
menu.
¾ Audio: When tick-selecting the option, system
will record video and audio simultaneously.
5�2�4�5 Email set
Click [Main MenuNetworkEmail] option to enter into the email set interface shown as
Picture 5-37
Picture 5-37
SSL: is a security link transport protocol. You can
encrypt your communication info (including your
email) using SSL to prevent hackers from monitoring
your email or communication info and even your
password.
Please set SSL to “On” via Gmail.com server, and set
to “Off” via other mail server.
¾ SMTP Port: indicate one kind of mail transmittal port opened by Simple Message Transfer
Protocol (SMTP). The port number for most mails is 25 except such as Gmail server (Port
No.: 465).
¾ SMTP server: indicates server address you used.